Degerö 35 S
Cruiser/Racer built in 2000Strong and seaworthy cruiser made in Finland. The Degerö 35 S was designed by the Swedish architect Håkan Södergren as a long dstance sailor and built by the Finnish shipyard "Veneveistämö Kristeri ja Kumpp"/Degerö Boat OY in best Scandinavian boat building tradition. With a ballast ratio of approx. 40 %, the deep cockpit protected by a fixed windscreen, a moderate lateral plan with skeg and the traditional round stern the Degerö 35 S is a very reliable vessel even in extreme weather conditions. The generous tank capacities make long passages possible. Beautiful, well built interior in Burma teak and ample storage space in lockers, shelves and compartments all over the yacht.
Key Facts
- Very seaworthy cruiser
- Two forestays (self tacking jib)
- Bowsprit in stainless steel and teak
- Bowthruster
- Blue hull
- Round stern
Main Info
| Model | Degerö 35 S |
|---|---|
| Manufacturer | Degerö Boat OY (FIN) |
| Designer | Håkan Södergren |
| Category | Cruiser/Racer |
| Year | 2000 |
| Location | Deutsche Ostseeküste |
| Flag | Germany |
|---|---|
| VAT status | EU-VAT paid |
| Material | GRP |
| Rig | Sloop |
| Cabins | 2 |
| Berths | 4 |
Dimensions & Technical details
| Length | 11.30 m |
|---|---|
| Beam | 3.50 m |
| Draft | 1.65 m |
| Displacement | 8.5 t |
| Sail area | 60.0 m² |
| Engine | VOLVO PENTA MD2040 |
| Power | 29 KW / 40 PS |
|---|---|
| Drive | Shaft with folding propeller |
| Fresh water | 350 L |
| Fuel | 150 L |
| Holding tank | 60 L |
Degerö 35 S | Cruiser/Racer built in 2000
Specification
Rigging/Sails
- Rigged with a keel stepped, 9/10 fractional SELDEN aluminum mast
- Two sets of spreaders.
- Second forestay for furling genoa
- Aluminum tubes for rigging screws
- Spinnaker pole
- Self-tacking jib track
- Manual backstay adjuster
- Sails: Mainsail approx. 33 m² HOLM-Sails with lazy jacks and lazy bag
- Furling genoa approx. 49 m² HOLM-Sails on FURLEX 300s genoa furler
- Self tacking jib approx. 30 m² HOLM-Sails on FURLEX 200s jib furler
- Spinnaker approx. 105 m² with spinnaker gear
- Storm jib
Deck
- Electric anchor windlass LEWMAR with BRUCE-anchor 20 kg and 30 m anchor chain 8 mm
- Stainless steel bowsprit made by Niro-Petersen with integrated anchor roller
- Bow ladder
- Teak steps
- Bobstay and attachment point for forward forestay
- Curved track for self-tacking jib
- Teak cockpit
- Fixed windscreen with sprayhood
- Cockpit tent
- Swim ladder
- Stainless steel genoa winches ANDERSEN 46.2ST
- Stainless coach house winches ANDERSEN 28.2ST
- Spacious locker in cockpit to starboard
Layout/Interior
- Saloon with two longitudinal sofas at folding saloon table
- Forward facing charttable to starboard aft
- L-shaped galley on portside with gas stove (2 burners and oven)
- Double sink with additional manual seawater foot pump
- Electric coolbox and additional
- Folding work surface
- Forward cabin with V-shaped double berth
- Lockers and storage compartments
- Aft cabin with double berth and locker
- Heads compartment to starboard aft
Technical Equipment
- VOLVO PENTA MD2040 3 cylinder inboard diesel 40 hp/29 kw with shaft drive
- 3 bladed folding propeller and stainless steel diesel tank 150 l
- Bowthruster VETUS
- 230 V shore power connection with battery charger 12 V/25 A
- Three gel service batteries 12 V/80 Ah
- Gel starter battery 12 V/55 Ah
- Two stainless steel water tanks 175 l
- Hot water heater 25 l
- Stainless steel holding tank 60 l
- TAYLOR diesel heater at main bulkhead in saloon
Safety
- Lifesling
- Fire extinguishers
- Electric and manual bilge pump
Accessories
- Fenders
- Mooring line
Brokerage Liability Disclaimer
All information especially regarding the VAT-status of a yacht has been supplied by third parties. It is non-binding and without guarantee, subject to error and alteration. Our brokerage relies exclusively on information supplied by the vendor carefully compiled and checked by us to the best of our knowledge. Hence, a liability for correctness and completeness of provided information cannot be assumed.